Another resin test

I got a yellow resin via internet, and tried first test. The configuration was same as B9's red resin. In this photo, it seems good. But I feel this resin is more sensitive than red one. I mean this exposure time(for red resin) setting was too long for this yellow resin. I think the light might be easily diffused in this resin. The resin is strongly adhered to PDMS because it was it would peel off. I'll retry other setting for exposure.

[ Configuration ]
Attach (first) Layer(s) Exposure (sec) : 40.000
Number of Attach (first) Layers : 4
Initial Image Exposure (sec) : 25.000
Variable Perimeter Exposure (sec) : 25.000

Total Layers to Print : 89

Hybrid

Almost I got about my 3D printer. And next, I returned to develop GMP script.
Now, I'm using 'Skin' modifier to make body parts, but in this method, I couldn't make details of the parts. So I need to change 'Vertex Select Mode' to 'Face select Mode' to edit subsurf modified (I mean 'Applied') faces. This is 'Hybrid' system of GMP and GMP2.

After some tries, I got this result. I think this is good, and next is 'Wing shape'.

It's a good, it's a good.

After some 'aborting' problems, I had a suspicious for USB cable was a cause of this. I replace it to another cable, then two new objects were printed successfully.

Yes!!

After 24 hours, the object were printed successfully. I'm so happy. \(^o^)/

Nooooooooo!

I tried to print this object fifth times, but the printer aborted this time too.
The b9creator(print software) doesn't have the function that print start from specified layer. If I could specify the start layer, it could resume from aborted point.

I can't believe...

I tried to print the next model, but the printer aborted to print. Three times.
What's going on? It's maybe a bug in the controller or application. Hmmm, damn.

The first work of the year

This is a very first 3D print work of this year 2013.

Almost good, but I need some repair the projector. There are some dust on the DLP chip. I have to clean and put a gasket for prevent the dust enter, near future.