Exposure time

After re-making the PDMS layer on the vat, I tried a shorter exposure time test. The setting was 10.0 sec., the result was good, no problem at all. 10 second, that's enough for print each layer. And next, I tried large model that I failed last four times. Hey! It's no problem. I got a configuration for 'Yellow resin'.


[ Configuration ]
Attach (first) Layer(s) Exposure (sec) : 30.000
Number of Attach (first) Layers : 1
Initial Image Exposure (sec) : 10.000
Variable Perimeter Exposure (sec) : 10.000